3419-Feet AFL 36-Fiber MM Sub-Unitized Premise MicroCore2.0 Fiber Optic Cable

3419 feet AFL 36-Fiber sub-unitized Premise MicroCore 2.0 Cable. The next generation of Sub-unitized MicroCore Cables represent the evolution of high performance premise cabling. Enabling the highest density infrastructures, significant savings in both space and fiber management and routing infrastructures are realized when deploying cables from this family. Constructed of the highest quality materials and to exacting industry standards, these small-diameter cables provide the solution sought-out by today's structured cabling professionals. Each sub-cable is independently qualified and is suitable for individual routing paths within the rack/panel architecture. This enables a flexibility of design and deployment not available in comparable high density designs. Designed for direct termination and supportive of both single-fiber and multi-fiber architectures, this cable family should serve as the backbone to any deployed system. Cables are constructed with AFL MicroCore technology consistent with a long line of market leading designs. Features include:

• In-building cable runs where space is a premium
• Trunk applications where flexibility and small required bend radius are needed to route cable
• High density cable areas like Data Centers and Central Offices
• Lower cost cable runs where easy handling of tight buffered fibers not needed because cable will be spliced to factory terminated pigtails
• Trunk cables where MTP can be directly terminated on subunits
• Plenum NFPA 262 rated
• Tested to meet or exceed EIA/TIA 568-B3, Telcordia GR-409-CORE and ANSI/ICEA S-83-596
• Flexible dielectric FRP central strength member in four position
• High performance PVC jacket
• No preferential bend typically found in stacked ribbon designs
• Small diameter/superior bend performance
• All aramid tensile strength members within sub-units
• Sub-units are suitable for direct termination with round boot MTP
• Compliant to Directive 2002/95/EC (RoHS)
• Nominal Diameter: 0.28in
• Tension Installation: 150lbs
• Tension Long-Term: 45lbs
• Bending Radius Installation: 4.2in
• Bending Radius Long Term: 2.8in
• Maximum Attenuation (DB/KM) 850 NM: 3.0
• Maximum Attenuation (DB/KM) 1300 NM: 1.2
• Maximum Attenuation (DB/KM) 1550 NM: N/A
• Overfill Launch Min. Bandwidth (MHZ/KM) 850 NM : 700
• Overfill Launch Min. Bandwidth (MHZ/KM) 1300 NM : 500
• EMBc (MHZ/KM): 950
• Gigabit Ethernet min. Link Distance (Meters) 850 NM: 800
• Gigabit Ethernet min. Link Distance (Meters) 1300 NM: 550
• 10 Gigabit Ethernet min. Link Distance (Meters) 850 NM: 150
• 50/125µm multimode Laser-Link 150
• Tight Buffer Type: Bare
• AFL standard print