1044ft AFL 144-Fiber Armored MM Sub-Unitized Premise MicroCore Fiber Optic Cable

1 foot AFL 144-Fiber armored sub-unitized Premise MicroCore Cable. Interlock armor fiber cables feature a loose tube fiber cable and aluminum spirally wrapped armor, covered with a plenum-rated jacket. Sub-unitized Premise MicroCore Cables are ideal for high performance premise installations where space is a premium. The round cross-sectional building blocks combine to provide a tight package, while enabling high density architecture. Each 12-fiber sub-unit consists of 250 µm colored fibers and aramid strength members enclosed by a high performance jacket. The sub-units are designed to be independently routed in FMS systems. Aluminum Interlocking feature is a viable and cost effective solution for applications where a pathway is beyond its fill ratio, for areas where extra physical protection is needed, where network security is a concern, in a fast track installation, between buildings, direct burial or in trays. Cable is loose and will be cut to order. Features include:

• Jacketed armor that remains flexible due to the spiral wrap armoring process
• Easy one-pull installation into any environment
• Compact outside diameters when compared to plenum inner-duct or conduit
• Aluminum interlock offers 10 to 13 times the crush resistance of a standard dielectric fiber cable
• Eliminates the need for conduit or plenum inner-duct
• Significant cost savings in both materials and labor up to 25%
• Suitable for hazardous environments or difficult installations
• Can be installed in campus environments due to the durability and indoor/outdoor rating of the cable
• Rugged armoring materials provide additional security for your fiber backbone
• Armored cable installed in an outdoor environment should be bonded when passing into an indoor environment
• In-building cable runs where space is a premium
• Trunk applications where flexibility and small required bend radius are needed to route cable
• High density cable areas like Data Centers and Central Offices
• Lower cost cable runs where easy handling of tight buffered fibers not needed because cable will be spliced to factory terminated pigtails
• Trunk cables where MTP can be directly terminated on subunits
• Plenum NFPA 262 rated
• Tested to meet or exceed EIA/TIA 568-B3, Telcordia GR-409-CORE and ANSI/ICEA S-83-596
• Flexible dielectric FRP central strength member in four position
• High performance PVC jacket
• No preferential bend typically found in stacked ribbon designs
• Small diameter/superior bend performance
• All aramid tensile strength members within sub-units
• Sub-units are suitable for direct termination with round boot MTP
• Compliant to Directive 2002/95/EC (RoHS)
• Armour type: Aluminum Interlock
• Crush resistance per TIA/EIA FOTP-41: 440N/cm
• Impacts per TIA/EIA FOTP-25: 2 at 8.83 N-m
• Nominal Diameter: 0.69in
• Tension Installation: 150lbs
• Tension Long-Term: 45lbs
• Bending Radius Installation: 10.4in
• Bending Radius Long Term: 6.9in
• Maximum Attenuation (DB/KM) 850 NM: 3.0
• Maximum Attenuation (DB/KM) 1300 NM: 1.2
• Maximum Attenuation (DB/KM) 1550 NM: N/A
• Overfill Launch Min. Bandwidth (MHZ/KM) 850 NM : 700
• Overfill Launch Min. Bandwidth (MHZ/KM) 1300 NM : 500
• EMBc (MHZ/KM): 950
• Gigabit Ethernet min. Link Distance (Meters) 850 NM: 800
• Gigabit Ethernet min. Link Distance (Meters) 1300 NM: 550
• 10 Gigabit Ethernet min. Link Distance (Meters) 850 NM: 150
• 50/125µm multimode Laser-Link 150
• Tight Buffer Type: Bare
• AFL standard print